The Clutch; Summarization - Chery QQ Service Manual

•
Chery QQ Service Manual
The clutch used in this car is dry type, a diaphragm spring disc spring, often press
type clutch.
The clutch disc assembly is consist of six pieces of absorber springs, and is fixed
on the input axle of the transmission through splined hub.
The clutch platen assembly is fixed on the flywheel, the fixing state of
diaphragm spring is in this mode: when the Release bearing draws back, the
edges of diaphragm spring is beginning to drive the platen against the flywheel
This is the clutch jointing state.
Step on the clutch pedal to move release bearing forward, diaphragm spring. At
this time, diaphragm spring pulls the platen and comes away from the flywheel,
thereby disconnect driving from the flywheel via to input shaft.
For the vehicles with three-way catalyst, the clutch switch is located on the upper
position of the clutch pedal.
1,Pressure plate assembly
5,Release fork 6,Clutch housing 7,Clutch disc 8,Cushion or damper spring
Input shaft 10,Input shaft
Chapter 1 The Clutch
Section 1 Summarization
2,Pressure plate
11.Crankshaft
Chery Automobile Co., Ltd
Transmission System
3,
12,Flywheel
25
4,Release bearing
9,