Chery QQ Service Manual page 491

12. Install windshield
Note Verify that water- resisting chips have
been stuck on the face plate of car body
as showed in the drawing
1 When install windshield,
align the reference marks
on windshield and car body, then
gently press in windshield towards
periphery
2 Smear windshield at periphery
with bonding agent
3 Remove excess or spilled bonding
agent with scraper
4 Fasten windshield until bonding
agent hardened
13. Water leakage checking and maintenance
1 Water leakage test shall be conducted
after hardening period
(2) Block up water leaking places with
sealant
14.Install upper inlaid strips on windshield
Put upper inlaid strips on car body and pat the strips by hand to tighten
Chery QQ Service Manual
- 263 – Chery Automobile Co.,Ltd
bonding agent
2.7mm (0.11in)