Chery QQ Service Manual page 195

Chery QQ Service Manual
5, Use hammer or special tools to punch 3 small holes.
6, Hang the return spring.
7, Spread lubricant inside the release bearing and on the release shaft, install the
release bearing.
8, Spread a small quantity of lubricant on the end face of the input shaft splined
hub.
9, Put the marks of clutch fork and release shaft in order, and then screw down
the bolt.
Fig.3-93
Fig.3-94
Chery Automobile Co., Ltd
1-Releaseshaft
2-Oil seal
A
1-Release bearing
2-Release shaft
3-Input shaft
A, B
-93-
Transmission System
Plug
Baste