Chery QQ Service Manual page 164

Chery QQ Service Manual
Notice: If the input shaft bearing still remains in the clutch case, use special tool to
pull out the bearing.
5. Loosen the bolt, pull out the shift head.
6. Loosen the shift lever bolt and gasket, take out the spring and ball.
7. Remove the shift lever, boot and oil seal.
8. Remove the differential oil seal from the clutch case.
Notice: The used oil seal cannot be used repeatedly.
Fig.3-17
Fig.3-18
Fig.3-19
-62-
Chery Automobile Co., Ltd
Transmission System
1- Input shaft oil seal
2- Output shaft bearing
outer
3- Special tool
1- Shift head
2- Shift lever
3-Bolt
1- Shift lever
2- Boot
3- Oil seal
4- Blot
5- Gasket
6- Spring
7-Ball