Removal And Installation Of Front Foglight - Chery QQ Service Manual

Chery QQ Service Manual
Installation:
a. Install head light in corresponding position, ensure the bolt fixing hole and the
headlight cross member welding nut are concentric;
b. Locate the headlight by three M6 bolts with the
engine compartment hood, verify and adjust the assembly position of headlight,
headlight should protrude from engine compartment hood a little, you can feel that
there is a radian between them by your hands, then tighten the fastener.

3. Removal and installation of front foglight

Removal:
If possible, y ou can raise the car first then remove
form bottom .
Loose the nut, take out the bolt
Remove h arness connect plug, take out the front
foglight from the location hole of the
In stallation:
First ensure left and right (left lamp sign L ,
right lamp sign R ), then put the foglight into
installation hole from front, insert two locating pin
into location notch and use bolt and nut to tighten it.
Connect foglight harness butt joint;
torque 1.6 2.0 N·m. Drop the
front bumper
- 44 -