With Assistant Battery - Chery QQ Service Manual

With assistant battery

Caution:
Avoid pushing or pulling the car to start, which may cause the damage of exhaust gas
purification system and/or other parts.
When the jumper cable is applied, carefully handle the assistant battery and the
discharged battery. Avoid spark, and observe the following steps.
Warning:
Any breach of the following conditions or steps may cause the following situations:
(1) Serious damage to person (especially the eyes) or materials, which result from
the explosion of battery, combustion of acid liquor of battery and the electrified body.
(2) Damage to the electronic parts of car.
Never place the battery in the place with electric spark, for the gas generated by
battery is inflammable and explosive.
Remove the jewelry, watch and other valuable goods, and wear protective glasses.
Prevent the liquid of battery from directly touching eye, skin, fiber and varnish,
because it is corrosive acid liquor. In case that it touches any parts, rinse them
immediately.
Take care that the metallic tools or jumper cable don't touch the positive t erminal of
battery (or the metals connecting with it) and other metals in the car, for it may
cause short circuit.
Keep the little children away from the battery.
1. Pull up the parking brake and put the gear shifter to the neutral position, switch off
the igniter, lights and all other electric loads.
2. Connect one end of a jumper cable to the positive terminal of assistant battery, and
the other end to the positive terminal of the discharged battery (jump-start the engine
with 12v battery only).
3. Connect one end of the negative cable to the negative terminal of assistant battery,
and the other end to the firm engine ground cable (e.g. in the exhaust manifold),
which is at least 45cm(18in) away from the battery which starts the car.
Warning: avoid directly connecting the negative cable to the positive terminal of the
Chery QQ Service Manual
- 16 -
Charging System