Chery QQ Service Manual page 315

Chery QQ Service Manual
5. Daub lubricating grease on inside of the end cover, install rectifier end cover.
6. Install end cover sealing gasket and braking spring, then install armature retainer
firmly, Daub lubricating grease on the 40% space before install the rear cover.
7. Install magnet switch.
8. After make a connection with battery, check the working condition of the starter
motor is normal or not.
1.rectifier end cover
2.armature clip plate
3.brake spring
4.end cover
5.nut
6.magnet switch
7.end cover bolt
8.start motor bracket
- 8 -