Table of Contents
Advertisement
Instrument Panel
Automatic Transmission Failure Indicator
The indicator will be on after turning on ignition
switch and automatic transmission system is on
self-checking status; the indicator will go off if the
system is free of failure. Please check the
automatic transmission system if the indicator is
always on.
If the indicator is on during your driving, it means
the automatic transmission system has failure and
please come to Chery authorized service station
for overhaul as soon as possible.
If the indicator blinks during your driving, it means
the
over
high
temperature
transmission and please come to Chery authorized
service station for overhaul as soon as possible.
Snow Road Mode Indicator
28
When ignition switch is turned on, pressing the
snow road mode button nearby the gearshift
lever, the instrument panel snow road indicator
will be on; start the engine and shift to gear D to
start up and driver the vehicle in 2nd gear
(suggest to select this mode when driving on
snow road or road of poor coefficient of
adhesion); pressing the snow road mode button
again; this indicator in instrument panel will go off
and system will quit the snow road mode.
Brake Pad Thickness Indicator
The brake pad thickness indicator will be on if the
brake pad has severe wearing; please drive the
vehicle carefully and replace the brake pad at
of
automatic
service station soon.
Coolant Temperature Gauge of Engine
It indicates the coolant temperature.
Below C – Low Temperature Range
During the warming-up process of starting, the
engine may operate across this range for a short
time. In this temperature range, the engine shall
not operate at high speed; moreover, the operating
load of engine shall be never excessive.
Please go to the Chery authorized service station
for overhaul if the hand remains in this range for a
long time.
Between C and H - Normal Temperature
Range
The hand lies in the range while driving properly.
The hand may depart off this range when the
outside temperature is too high and the engine is
heavy loaded. The vehicle may travel as long as
the coolant alarm lamp is off, it is necessary to stop
the engine immediately and check the cooling
system in the event of flashing alarm from coolant
alarm lamp.
Hide quick links:
Advertisement
Table of Contents
