Locking And Unlocking Of The Door; Anti-Theft Alarm System; Alarm; Replacing The Battery Of Remote Controller - Chery Tiggo Owner's Manual

Hide thumbs Also See for Tiggo:
Table of Contents

Advertisement

Door Lock & Anti-theft

Locking and Unlocking of the Door

Press locking button
on the remote controller
once, and all the doors will be locked; at the same
time, the safety LED will show the system is in alert
condition, which means the anti-theft function is
enabled.
Press this unlocking button
doors will be unlocked; which means the anti-theft
system is disabled.

Anti-theft Alarm System

The system function is to prevent unauthorized
person opening door or luggage boot; when
anti-theft system is enabled, the door turn signal
lamps will blink and alarm will sound up.

Alarm

If the anti-theft system is not disabled, someone try
to open the doors, luggage boot or attempt to start
engine or remove the radio; the alarm will be
enabled again..
70
Replacing
Controller
If the range of action of remote controller is
gradually decreased, you should replace the
battery. (The battery model shall be specified by
once, and all the
Chery.)
Follow the following steps:
1. Use plain end tools to open the remote controller
unit from the side clip.
2. Carefully pry out the battery and then insert the
new battery into the two connection points with the
mark (+) facing upwards.
3. Assemble the remote controller unit in reverse
order of disassembling.
The used lithium cell cannot be dealt
with as general household rubbish. Please
send it to the qualified waste disposal station.
the
Battery
of
Remote

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents