System Board Specifications - Gateway 9510 User Manual

System board specifications

Processor
Chipset
Memory
PCI device/slot
Video
RAID
Dual 604-pin sockets (FC-mPGA4 package, 90 nM technology)
800 MHz Front Side Bus (FSB)
Supports Intel Xeon CPUs (2.8 GHz or faster) with 1024 KB cache
1 VRD (Voltage Regulator Device) per processor, 10.1 compliant
Intel E7520 chipset
Supports 800 MHz Front Side Bus (FSB)
■
Memory Controller Hub (MCH)
■
Intel 82870P2 (PHXD) PCI/PCI-X Controller Hub
■
Intel 82801ER I/O Controller Hub5 (ICH-5)
■
Eight DIMM slots support as many as 16 GB total memory
DDR2-400 ECC registered DDR DIMM modules
■
DIMM organization x72 ECC
■
240-pin DIMMs (256 MB, 512 MB, 1 GB, or 2 GB only)
■
On-board VGA and Gb Ethernet
PCI slots:
Slot 1 - PCI-X 64-bit/133 MHz
■
Slot 3 - PCI Express x4
■
Slot 4 - PCI Express x8
■
Slot 5 - PCI-X 64-bit/133 MHz
■
Slot 6 - PCI-X 64-bit/100 MHz
■
Note: Slot 2 is for the RAID DIMM accessory only. Do not attempt to
install a PCI card in this slot.
On-board ATI Rage XL SVGA video controller with 8 MB of SDRAM
Two Serial ATA 150 ports from the ICH5-R supporting entry level RAID
functionality, including Integrated Mirroring and Integrated Striping
(RAID levels 0 and 1).
The LSI Logic 53C1030 supports the LSI logic Integrated Mirroring
Enhanced (IME) and Integrated Striping (IS) technology (RAID levels
0 and 1).
Optional ROMB Activation Key also supports RAID levels 5, 10, and
50 and the following:
Integrated Intel RAID Controller SROMBU42E through Intel XScale
■
technology. Includes support for up to 256 MB of unbuffered DDR333
RAID cache (requires Intel RAID Activation Key and either the Intel
Portable Cache Module or one 128 MB DDR333 memory DIMM.
ROMB battery backup unit support (requires the Intel Portable Cache
■
Module accessory kit or one 128 MB DDR333 memory DIMM).
www.gateway.com
System board specifications
173