Gateway 9510 User Manual page 111

Chapter 5: Using the BIOS Setup Utility
8
Remove the jumper across pins 1-2 of header J1D1, then place the jumper across
pins 2-3.
9
Follow the instructions in
10
Reconnect the power cords and turn on the server. The BIOS memory is cleared.
11
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
12
Follow the instructions in
13
Place the jumper back onto pins 1-2.
14
Follow the instructions in
15
Turn on the server. A message appears saying that the CMOS Date and Time are not set.
16
Press F1 to reset the BIOS to factory default settings.
106
J1D1 CMOS
CLEAR
1
BMC Control
2
Force Erase
3
PASSWORD
CLEAR
5
Protect
6
Erase
7
RECOVERY
BOOT
9
Normal Boot
10
Recovery Boot
11
"Closing the server case" on page
"Opening the server case" on page 42
"Closing the server case" on page
www.gateway.com
52.
52.