4
Remove the front PCI card retainer by pressing on the two tabs (one on top and one
on bottom) of the retainer and pulling it from the chassis.
Front PCI
card retainer
5
Route the indicated power cables by:
Routing the P1, P2, and P14 cables (identified on the cables), to the server board.
■
Routing the longest power cables (P8, P9, P10, and P11) to the six-drive bay.
■
Routing the P6 and P7 power cables to the four-drive bay.
■
Routing the SATA drive power cables to whichever bay is using SATA fixed drives
■
(if necessary).
www.gateway.com
Installing drives
57