Gateway 9510 User Manual page 201

Appendix B:
Caution
The following 2nd level submenus are accessed from the submenu indicated in the first
column.
BIOS submenu
IDE
Configuration
(Cont'd)
BIOS submenu
IDE
Configuration
(Cont'd)
196
Before changing modes, back up array data and delete existing
arrays, if any. Otherwise, loss of data may occur.
After operating system installation with a selected SCSI RAID mode,
only change this mode selection if you are prepared to rebuild the
RAID array. Changing the mode could damage the current operating
system installation on the RAID volume.
BIOS 2nd level Setting
submenu
Mixed P-ATA /
S-ATA
First ATA Channel
Second ATA Channel
BIOS 2nd level Setting
submenu
IDE Device
Configuration
Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
www.gateway.com
Value
P-ATA M-S
S-ATA M-S
S-ATA M-S
None
Value
Device information
Device vendor
Device size
Device LBA mode
Device block mode
Device PIO mode
Device Async DMA
mode