Gateway 9510 User Manual page 99

Chapter 4: Installing Components
6
Locate the old battery on the system board and note its orientation. You will need
to install the new battery the same way.
7
Push the battery retention clip away from the battery until the battery pops up.
8
Remove the old battery.
9
Make sure that the positive (+) side of the new battery is facing correctly, then press
the new battery into the socket until it snaps into place.
10
Follow the instructions in
11
Turn on the server.
12
Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility
opens.
13
Restore any BIOS settings that you wrote down in
14
Save all your settings and close the BIOS Setup utility.
94
"Closing the server case" on page
www.gateway.com
52.
Step 3.