Gateway 9510 User Manual page 82

5
Install the nylon standoff into the hole in the IMM module board which corresponds
to the hole in the system board (see the illustration on
Important
6
Find the IMM connector on the lower front portion of the system board.
Standoff hole
The snap fit ends of the standoffs go into the holes in the IMM module
board. The snap lock ends of the standoffs go into holes in the system
board.
Snap fit end goes into
IMM board.
Snap lock end goes
into system board.
www.gateway.com
Installing an Intel Management Module (IMM)
page
IMM connector
77).
77