Gateway 9510 User Manual page 124

Configuring your ROMB RAID solution with the RAID BIOS Console configuration utility
Icon
To configure your ROMB RAID solution:
1
Restart the server.
2
When the server reboots, hold the C
appears:
Press <Ctrl>-<G> for BIOS Console
The BIOS Console opens at the Adapter Selection screen.
3
Select an adapter from the list, then click
The Configuration Wizard screen opens.
Description
Click on this icon to scan for adapters connected to your
system.
Click on this icon to display the properties of the adapter,
such as the firmware version, BIOS version, RAM size,
and initiator ID.
Click on the icon to access the Configuration Wizard so
that you can configure the arrays and logical drives.
Click on this icon to silence the sound on the alarm.
key and press G when the following message
TRL
Start
www.gateway.com
to begin the configuration process.
119