Table of Contents
Advertisement
5
Press the S
PACEBAR
6
Select the physical drives to associate with the current array, then press the S
7
Set the RAID level for the logical drive by highlighting RAID, then pressing E
The available RAID levels for the current logical drive are shown.
8
Select a RAID level, then press E
9
Set the RAID logical drive size and stripe size.
10
When you have defined the current logical drive, select
11
Repeat
Step 7
through
12
Save the configuration when prompted, then press E
Management menu.
13
Select
from the Management menu.
Initialize
14
Use the S
PACEBAR
15
Select
at the prompt, then press E
Yes
the progress of the initialization process.
16
When the initialization process is complete, press E
17
Exit the RAID Configuration utility and reboot the server.
to select the array. The Logical Drive Configured screen opens.
.
NTER
Step 10
to configure additional logical drives.
to highlight the logical drive to initialize, then press F10.
NTER
www.gateway.com
Configuring your onboard RAID solutions
Accept
to return to the
NTER
to begin initialization. A graph will show
to return to the previous menu.
SC
PACEBAR
.
NTER
, then press E
.
NTER
113
.
Advertisement
Table of Contents
Troubleshooting
