Gateway 9510 User Manual page 125

Chapter 6: Configuring your RAID solutions
Important
4
Select the configuration type, then click
5
Select the configuration method:
Auto Configuration with Redundancy - Configures RAID 1 for systems with 2 drives
or RAID 5 for systems with 3 or more drives. All available physical drives will be
included in the logical drive using all available capacity on the disks.
Note: Hot spare drives must be designated before starting auto configuration using
all available capacity on the disks.
Auto Configuration without Redundancy - Configures all available drives as a RAID
0 logical drive.
Custom Configuration - Lets you specify configuration parameters.
120
If there is a configuration mismatch between the disks and the
NVRAM, the utility automatically displays the Select Configuration
screen. Choose whether the configuration should be read from the
RAID array or from NVRAM.
www.gateway.com
.
Next