Gateway 9510 User Manual page 22

13
Install three rack stud screws (provided in the rack conversion kit) along each side of
the server in the holes provided.
14
Reinstall the bezel assembly by following the instructions in
plastic bezel assembly:" on page
rack conversion kit) by snapping it into place.
- OR -
Install the optional metal security bezel by following the instructions in
the optional metal security bezel (for rackmount configuration):" on page
15
If necessary, re-orient the plastic filler panels in the plastic bezel.
16
Affix the new LED and Button label (readable from the horizontal) over the LEDs and
buttons on the bezel.
17
Reinstall the cover by following the instructions in
page 52.
18
Install the rackmount rail kit by following the instructions in the manual that
accompanied the kit.
49, then install the hinge cover (provided with the
www.gateway.com
Setting up the hardware
"To install the standard
"Closing the server case" on
"To install
51.
17