System specifications
Case size
(H×W×L)
Weight
Fans
Ports
Drives
(standard)
Hard drive bays
Card sizes
Power supply
Operating
systems
Certifications
System board specifications
Processor
Chipset
Memory
PCI device/slot
VGA
LAN
86
APPENDIX A: Server Specifications
3.44 × 16.93 × 27.38 inches (8.75 × 43.0 × 69.55 cm)
Minimum - 40 lbs (18.14 Kg) (no bezel, power supplies, hard drives, optical
drive, diskette drive, fans, cables, and so on)
Maximum - 60 lbs (27.22 Kg) (±0.5 Kg)
Three dual-rotor, multi-speed system fans
■
Two single-rotor, multi-speed system fans
■
PS/2 keyboard or mouse (2)
■
USB (4 standard, 2 front and 2 back)
■
Serial
■
VGA (2 standard, 1 front and 1 back)
■
LAN (2) (RJ-45)
■
IPMI (RJ-45) for BMC
■
One slimline drive bay for an optical drive
■
USB Floppy diskette drive (optional)
■
Tape drive (optional)
■
Six SATA or SAS hot-swap hard drive bays
Supports three full-length, full-height and two low-profile PCI expansion cards
One 700 W hot-swap, power supply module (standard)
Additional 700 W hot-swap redundant power supply module (optional)
Supports Windows Server 2003 (all), Windows Small Business Server 2003 (all),
and Windows Storage Server 2003 (all)
FCC Class A
■
UL
■
cUL
■
Supports as many as two Intel® Xeon™ 5100 (Dual Core) or 5300 (Quad Core)
Series processors
Intel Blackford MCH (Northbridge)
■
Intel ESB2E (Southbridge)
■
Eight 240-pin vertical DIMM slots support from 512 MB to 32 GB of
fully-buffered (FB-DIMM) DDR2-667 compliant, 72-bit, single rank or dual rank,
SDRAM modules.
Riser 1 supports - one full-length, full-height 64-bit PCI-X 100 MHz card and
■
two PCI-Express cards
Riser 2 supports - two PCI-Express cards.
■
Integrated Matrox G200 Graphics Core with 2.25 MB
■
Up to 1280 × 1024, 8 bpp or 1024 × 768, 16 bpp
■
Intel ESB2 controller
■
Dual onboard 10/100/1000 network interface
■
IEEE 850.3u auto-negotiation support
■
Full duplex support
■