Loading Documents On The Adf - Muratec MFX-1820 Quick Start Manual

Loading documents on the ADF

1
Align the document guide with the document width.
2
With the front of the document facing up, push it until the top edge touches.
3
Align the document guide along the document.
NOTE
The following documents cannot be loaded on the ADF.
• Torn documents or those with holes
• Extremely wrinkled or curled documents
• Documents which are moistened, or stuck with static electricity
• Documents with carbon on the back or no-carbon documents
• Cloth, metal sheets
• Documents with staples, paper clips, or adhesive tape attached
• Documents pasted or glued together
• Glossy documents or documents with a special coating
25