Muratec MFX-1820 Quick Start Manual page 87

Setting item Setting item
First level Second level
Copy Settings Default Set-
tings
Copy Reserva-
tion
Fax Settings Default Set-
tings
Setting item
Description
Third level
Contrast You can set the default contrast for scan-
ning.
Zoom You can set the default magnification for
copying.
Sort You can set the default for sorting.
Mix Copy You can set the default for Mix Copy.
Next Doc You can make different default next
document settings for the ADF and the
document glass.
(Only settings for the document glass are
possible when an ADF is not fitted.)
– If you set this to ON, you can scan the
next document during copying.
Resolution You can set the default resolution for
scanning.
Contrast You can set the default contrast for scan-
ning.
TTI If you set this to ON, sender information
(TTI) is added to the sent document.
Memory Tx If you set this to ON, documents are first
scanned into memory and then sent.
If you set this to OFF, the documents
are sent in real-time, that is, as they are
scanned.
(This item appears only when the ma-
chine is fitted with an ADF.)
Tx Report If you set this to ON, a "Tx Report" is
printed after each transmission.
Stamp If you set this to ON, documents that
have been scanned using the ADF are
stamped.
(This item appears only when the ma-
chine is fitted with an ADF.)
Next Doc You can make different default next
document settings for the ADF and the
document glass.
(Only settings for the document glass are
possible when an ADF is not fitted.)
Reference in
Settings the User's
Guide
Lightest
• (Lighter)
Normal
• (Darker)
Darkest
Auto
100%
Off
On 6-4
Off
On
• ADF
On
Off
• FBS
On
Off
On
6-5
Off
Normal
Fine
S-Fine
Photo
Background
Lightest
• (Lighter)
Normal
• (Darker)
Darkest
On
Off
On
Off
6-14
On
Off
On
Off
• ADF
On
Off
• FBS
On
Off
87