Cleaning The Recording Area - Muratec MFX-1820 Quick Start Manual

Cleaning the recording area

Clean the rollers of the printer section in the following cases:
• When paper jams occur frequently
• When the print quality is bad (also clean the scanner)
Carefully wipe with a soft cloth dipped in water and wrung out thoroughly. Then, wipe with a clean dry cloth.
Wipe down the whole roller, turning it by hand.
The fuser unit and area around it inside the machine are extremely hot when operating. Take care not to touch
the fuser unit and area around it. It may cause burns.
IMPORTANT
• Do not expose the drum unit to the light for five minutes or more.
• Do not touch the drum surface. This could cause a recording error.
96