Replacing The Stamp - Muratec MFX-1820 Quick Start Manual

Replacing the stamp

If the stamp ink becomes light, replace the stamp as follows:
Automatic Document Feeder (ADF)
1
4
Reverse Automatic Document Feeder (RADF)
Using tweezers, remove the used stamp and then insert the new stamp.
If the stamp is floating, a jam can occur. Be sure to push in the stamp until it clicks.
IMPORTANT
• Do not directly touch the stamp surface. If the ink adheres to your hands, wash with water immediately.
• Use stamps designed for use in Muratec machines.
2 3
5
37