Starting Admin; Obtaining A Multi-Media Database; Using The Default Multi-Media Database - Honeywell Rapid Eye System Administration Manual

Multi-Media Database

Starting Admin

Obtaining a Multi-Media Database

Using the Default Multi-Media Database

262
1. On your desktop, either:
• Click Start on the windows taskbar, select Programs, and then Rapid Eye
Multi-Media. Click Rapid Eye Multi-Media Admin.
- or -
• Double-click the desktop icon for Admin.
2. Then, either:
• Follow
Obtaining a Multi-Media Database
• Use a Multi-Media database that is already available. Skip to
273.
To obtain a Multi-Media database after starting Admin, you have the option of:
• Using the default, empty, Multi-Media database. An empty database comes with the
software. It is used to access a unit out of the box. This is a simple way to get started.
• Switching to another Multi-Media database. If you are given a Multi-Media database
that was prepared during the installation or at some other time (see
on page 263).
Another Database
• Creating an empty Multi-Media database (see
page 265).
• Copying a Multi-Media database. You can base a new MS-Access database on an
MS-SQL or MSDE, and vice versa (see
• Upgrading a Multi-Media database. Multi SAs can use a database from their older
Multi-Media system (see
The First Time that you Log On
The file name of the default, Multi-Media central database is: REMCentral.mdb. You can
locate it by browsing through the folder holding the Multi-Media software.
on page 262.
Creating a Multi-Media Database
Database Based On Another
Upgrading a Multi-Media Database
on page
Logging On
Converting to
on
on page 269).
on page 271).