Starting Admin; To Start Admin; Obtaining A Multi Db - Honeywell rapid eye System Administrator Manual

Multi Database

Starting Admin

Fig. 14–2. Admin Icon on the Windows Desktop.

To Start Admin

1. On your desktop, either:
Click Start, point or click to: Programs, and then Rapid Eye Multi. Click Rapid Eye Multi Admin.
Double-click the desktop icon for Admin.
2. Then, either:
See Obtaining a Multi
Use a Multi db that is already available. Skip to p.

Obtaining a Multi Db

Alternatives
To obtain a Multi db after starting Admin, you have the option of:
Using the default, empty, Multi db. An empty Multi db comes with the software. It is used to
access a unit, out of the box. This is a simple way to get started.
Switching to another Multi db. If you are given a Multi db prepared during the installation or at
some other time, see
Creating an empty Multi db. See
Copying a Multi db. You can base a new MS-Access Multi db on an MS-SQL or MSDE, and vice
versa. See
Upgrading a Multi db. Multi SAs can use a Multi db from their older Multi system; see
Upgrading a Multi db
238
Db, p. 238.
Using Another Db:
Creating a Multi
Db Based On Another.
on p. 247
248 for section Logging
Converting, on p. 240.
Db, below.
On.