Changing The Time Spent At A Site During A Tour; Selecting Another Connection To A Site During A Tour; Figure 13-3 Customizing The Duration Of A Multi-Media Unit In A Tour - Honeywell Rapid Eye System Administration Manual

Touring Many Sites

Changing the Time Spent at a Site During a Tour

TIP!

Selecting Another Connection to a Site During a Tour

254
1. Using Admin, click the Tours tab.
2. To display the Update Tour dialog box, do one of the following:
• Double-click the name of the tour that you want to customize.
- or -
• Select the tour that you want to customize, then either: click
Update in the Actions menu, or press the F12 key.
Figure 13-3 Customizing the Duration of a Multi-Media Unit in a Tour
3. In the Add/Update Tour dialog box, do one of the following:
• Select a site, then click
- or -
• Double-click the name of a site.
4. In the Duration field, you can adjust the minutes or seconds to change the time spent
at the site, as needed (see
5. Click Save and Close.
Should you plan to view a site for long periods, say thirty minutes or more, consider
using a Live Session instead of changing the durations of time spent at each site.
1. Using Admin, click the Tours tab.
2. To display the Update Tour dialog box. Double-click the name of the tour you need to
customize.
3. Double-click the name of a site.
4. Click the drop-down arrow next to the Connection box. There may only be one
connection to select. Connections are defined while adding or updating a site. See
Connecting to a Rapid Eye Unit
5. Select a connection type used for the site during the tour.
6. If needed, click Save and Close. Change the amount of time that the site will display
for in the site tour (see
.
Figure 13-3).
on page 41.
Changing the Time Spent at a Site During a Tour
on the toolbar,
on page 254).