Customizing a Tour
Changing the Order of Sites in a Tour
Document 800-07769 Rev A
02/11
Figure 13-2
Default Amount of Time for a Tour of Each Unit
For each tour, you have the option of specifying:
•
The order in which sites are displayed in a tour (see
on page 253).
Tour
•
The time spent at each site during a tour (see
on page 254).
During a Tour
•
The connection to be used to reach the site. By default, the first connection in the
site's definition is used (see
page 254).
1.
Using Admin, select the Tours tab.
2.
To display the Update Tour dialog box, do one of the following:
•
Double-click the name of the tour that you want to customize.
- or -
•
Select the tour that you want to customize, then either: click
Update on the Actions menu, or press the F12 key.
3.
In the Update Tour dialog box, drag and drop a site name to a new position in the list.
4.
You can click Save and Close or make more changes to the site tour.
Rapid Eye DVR System Administrator Guide
Changing the Order of Sites in a
Changing the Time Spent at a Site
Selecting Another Connection to a Site During a Tour
on
on the toolbar,
253