Figure 12-6 List Of Sites Associated With A Policy; Figure 12-7 Updating A Site - Honeywell Rapid Eye System Administration Manual

Archival Policies
Immediate
Archival Policy
Scheduled
Archival Policy
240
9. The archival time is displayed next to the site names (see below). The default archival
time is the half hour that includes the current time (time when policy was created).
Figure 12-6 List of Sites Associated with a Policy
Note Archiving data during the daylight saving time switching period may cause
some difficulty. We recommend that you create a clip specifically for the
switching period to ensure the data is safely backed up.
10. To change the archival time (see
a. Select one or more sites in the Sites Associated with this Policy table.
b. Click .
c. Use the appropriate drop-down arrows to change the From and To archival
Times. If you are using an Immediate Archival Policy, you can also change the
From and To archival dates. Click Save and Close.
Figure 12-7 Updating a Site
Note Clicking Save and Close in the Update Site In Policy window will save the
entire policy. The Save and Close button in the Add Archival Policy window
will be grayed out.
Note Archiving will only take place on sites that use an Ethernet network
connection. Sites that use a dial-up connection are not currently supported.
Note
the order listed here, one at a time.
In this example, unit 001, or Main
Unit, will archive first and unit 002
(Multi-Media RU) will archive next.
Data is backed up between the
From and To times listed.
Figure 12-7):
Archiving will happen in