High-Security Considerations; Figure 10-9 Limiting An Account's Access To Devices - Honeywell Rapid Eye System Administration Manual

Security for a Multi-Media System
Select the sites,
cameras, and
devices that the
user can access.

High-Security Considerations

200
You need to have configured the devices at a site before you can limit their use in a user's
account. See on page
Cameras
on page to configure POS devices.
139
1. Using Admin, click the Users tab.
2. Display the Update User dialog box by either:
• Double-clicking the name of the user account that you want to update.
- or -
• Selecting the user account that you want to update, then click either:
toolbar, Update in the Actions menu, or press the F12 key.
3. In the Update User dialog box, select the User can access selected sites option.
See for more information.
Figure 10-9
4. In the tree of sites below the User can access selected sites option, select a site by
clicking the checkbox next to the name of the site. The checkmark that appears
means that access to the site is granted to the user of the account.
5. Expand the site, as in
name of a site, select one or many devices. A checkmark means that access to the
device is granted to the user of the account.
6. Click Save and Close.
Figure 10-9 Limiting an Account's Access to Devices
Your Multi-Media unit could be left insufficiently protected, so that performance or security
may be compromised. To reduce the probability of this, Honeywell recommends that your
Multi SA and your security officer check for situations such as the ones in
to configure cameras and
75
10-9. In the branch of cameras and devices below the
Figure
Configuring Other Hardware
on the
Table 10-4.