Support For Rapiddome Ptz Features; Rapiddome Ptz Tours; Figure 6-11 Detail Of Ptz Setup For The Rapiddome Driver - Honeywell Rapid Eye System Administration Manual

Support for RapidDome PTZ Features

Use the list to
select presets
or tours

RapidDome PTZ Tours

Document 800-07769 Rev A
02/11
A Multi SA can preset a RapidDome PTZ dome, using the View application, for:
• Mimic tours. A mimic tour recalls the commands to pan, tilt and zoom, that were sent
to a RapidDome camera. Mimic tours are also known as path tours.
• Preset tours. A preset tour recalls a list of PTZ presets. A few presets should be set
up before setting up a preset tour.
• Privacy zones. Use presets 100 to 127. The video feed is not displayed when a dome
is positioned at these presets.
shows details of a PTZ setup for the RapidDome Driver, on the Video tab, during
Figure 6-11
a Session. Details show controls for the mimic tour, preset tour and privacy
Maintenance
zone. The selection of presets and tours is made using the list above the PTZ controller. In
the list, Vector is used to select a preset tour.
Figure 6-11 Detail of PTZ Setup for the RapidDome Driver
Use controls to
program a
Mimic Tour
1. In the PTZ controller, click the drop-down arrow in the box under the row of numbered
buttons to display a list, showing Preset, Tour, and Vector (see
2. Do one of the following:
• For mimic tours, select Tour.
• For preset tours, select Vector.
Rapid Eye DVR System Administrator Guide
Figure
Select
Presets to
be set as
Privacy
Zones
Use controls to
program a
Preset Tour
6-11).
103