Dial-Up Connection; Figure 3-10 Adding A Dial-Up Connection; Figure 3-11 Dial-Up Connection; Table 3-2 Ip Defaults Used By Multi-Media Units - Honeywell Rapid Eye System Administration Manual

Dial-Up Connection

View
operator's
station
Document 800-07769 Rev A
02/11
Table 3-2 IP Defaults Used by Multi-Media Units
Point Rapid Eye Unit (Default Address)
IP Address 172.25.2.1
Subnet Mask 255.255.0.0
Figure 3-10 Adding a Dial-Up Connection
1. Select Use Dial-up Networking. Leave the Country Code at (dialing same country).
2. Enter the unit Area Code (City Code) and Phone Number.
3. You have the option of changing [site name] -> Dialup by entering a new
Connection Name (see
4. Click Save and Close. For a report, see
Figure 3-11 Dial-Up Connection
Modem
Note If a prefix number is needed to access an outside line, set the prefix—the
extra telephone keystroke such as a 9 or an 8—in Microsoft Window's
Telephony program.
Rapid Eye DVR System Administrator Guide
Figure 3-10).
Connection Report
POTS or ISDN
Modem
Operator PC (Network Card)
172.25.1.1
255.255.0.0
on page 56.
Rapid Eye
Multi-Media
READY
ALARM
HDD
unit
TM
49