Local User Management; Central User Management; Figure 9-1 Changing User Management - Honeywell Rapid Eye System Administration Manual

Managing User Accounts

Local User Management

Central User Management

Click to change
the local user
management
168
Creating Accounts Using LocalView
Local User Management enables a Multi SA to create operator accounts onsite, using
LocalView, for operating that unit. When user management is set to Local in LocalView, the
list of accounts on that unit can be edited.
Creating Accounts Using Admin
In addition, a Multi SA can create Rapid Eye accounts using the Admin application while
Local User Management is enabled. These standard Rapid Eye accounts are used to
access one or many units remotely using a PC running the View application.
Setting Local User Management
A LocalView administrator has the option of setting User Management to Local. Accounts
that were created centrally will remain on the unit.
Creating Accounts Using Admin
Central User Management only disables the onsite creation of operator accounts using
LocalView. If Central User Management is enabled, a Multi SA uses the Admin application
to create accounts. These central accounts can access Multi-Media units using the View
application or LocalView.
Figure 9-1 Changing User Management