Denying Access; Removing A User Account - Honeywell Rapid Eye System Administration Manual

Denying Access

Removing a User Account

Document 800-07769 Rev A
02/11
Denying access to sites is a security measure that is used against an operator who must be
stopped from using Multi-Media units as soon as possible. The account data is preserved.
For less severe cases, removing an account may be a sufficient measure (see
on page 175).
User Account
Denying Access to All Units with Admin
1. Using Admin, click the Users tab.
2. Double-click the name of the account in the User Name column.
3. Click the box next to Deny this account access to sites... so that it shows a
checkmark. Click Save and Close.
4. Update security at each site listed in the User can access selected sites list. To
update security, see
Updating Security on a Multi-Media Unit
Denying Onsite Access to LocalView
1. Using LocalView, click the Configuration tab.
2. Click the Users tab.
3. Select the account.
4. Click the box next to Deny Access so that it shows a checkmark.
For accounts created using Admin, whether user management is local or central:
1. Using Admin, click the Users tab.
2. Select the user that you want to delete.
3. Do one of the following:
• Click on the toolbar.
• Click Delete in the Actions menu.
• Press Delete on the keyboard.
4. When you are warned that the user is about to be deleted, click Yes to continue or No
to cancel. A message will warn you if other accounts are based on the account,
offering the option to proceed with—or cancel—the deletion of the account.
Rapid Eye DVR System Administrator Guide
on page 141.
Removing a
175