Table of Contents
Advertisement
Quick Test for Remote Video
Software for the Remote Operation of Hybrid LT DVRs
Checklist for Admin Software
Document 800-07766V4 Rev A
01/2013
This chapter describes how to perform a quick test to confirm that all the hardware and
software is working and video is being received from DVRs at remote sites.
Your organization's System Administrator may need to establish that video can be obtained
on an operator PC, after
Testing a Network Connection in the
Dial-Up Connection in the
It is useful to establish that the hardware and software installations are in good working
order before securing the system with passwords, user accounts, and so on.
Figure 3-1
Desktop Icon for the Admin Application
Refer to the
Rapid Eye™ Hybrid HD and Hybrid LT Digital Video Recorders System
Administrator
Guide, about using the Admin application to:
•
Open the ports in your organization's firewall that are needed by Rapid Eye Hybrid LT.
See
Firewall
Reference, page 47.
•
Install Rapid Eye Hybrid LT software. How to install and use Rapid Eye software by
Honeywell is explained in the
Recorders System Administrator
After installing Rapid Eye software, documentation about Rapid Eye Hybrid LT is
available at the operator PC. Click Start
x.x
Documentation
•
Create and log on to an empty Rapid Eye Hybrid LT central database.
•
Name the Rapid Eye site.
•
Add connection information about the Rapid Eye site.
Field, page 40.
Rapid Eye™ Hybrid HD and Hybrid LT Digital Video
Guide.
All Programs
publication title (choose the document you want to view).
3
Field, page 39, or
Testing a
Rapid Eye Hybrid LT
43
Advertisement
Table of Contents
