Multi-Media Audio; Audio Hardware; Figure 8-12 Expanded Netpit Device On Port 3, Showing Four Pos Devices - Honeywell Rapid Eye System Administration Manual
Hide thumbs
Also See for Rapid Eye:
- Administrator's manual (294 pages) ,
- System administrator manual (264 pages) ,
- Operator's manual (150 pages)
Table of Contents
Advertisement
Configuring Other Hardware
Multi-Media Audio
Audio Hardware
160
Figure 8-12
Expanded NetPIT Device on PORT 3, Showing Four POS Devices
Port Restrictions
•
A PIT device cannot be assigned to the virtual port of a NetPIT.
•
Only one NetPIT device can be assigned to a Multi-Media port.
Channels can be renamed. View operators use audio channels to:
•
Listen, using a microphone at the Rapid Eye Multi-Media site.
•
Talk, by talking on one channel, or broadcasting on both.
All sound sources are mixed at a View operator's station, regardless of the number of sites
being monitored at once. Each Rapid Eye Multi-Media site can send up to two channels of
audio to a View operator.
Microphones, powered speakers, and so on, need to be connected to a Multi-Media unit.
The operator PC also needs a microphone and speaker for two-way audio, and a sound
card. For more details about audio hardware connections, refer to the
Multi-Media Digital Video Recorder Installation
card to transmit sound to and from the Rapid Eye Multi-Media site.
Rapid Eye™
Guide. A PC running View requires a sound
Advertisement
Table of Contents
