Resolution Of Live Video In View Software; Other Video Settings - Honeywell Rapid Eye System Administration Manual

Resolution of Live Video in View Software

TIP!

Other Video Settings

Document 800-07769 Rev A
02/11
Automatic Optimization of Resolution for Live Video Sessions
View software optimizes the resolution of live video. The size of a camera window
determines which resolution is used. As an operator makes a camera window larger (or
smaller), the resolution of images is automatically adjusted for an optimal view of the video
feed. See the
Rapid Eye™ Multi-Media Digital Video Recorder Remote View Operator
for more procedures and tips about live video.
The resolution of recorded video is setup in a
change when View software automatically optimizes the resolution of live video.
Smoothing Video
Video smoothing is an option of the View application, set by the View operator. It adds a
load to the operator's CPU and can slow busy systems. The result of video smoothing is
not recorded; it can be toggled OFF/ON while monitoring recorded or live video. In a
Session, video smoothing can be seen in the Enhanced Preview window. See
Maintenance
The Enhanced Preview of Resolution
Digital Video Recorder Remote View Operator
Note The resolution and quality of video displayed by the Remote View application
can also be affected by the available bandwidth of the network the unit is
installed in. See
your system for high or low bandwidth.
It is also possible to disable LocalView to improve system performance. If
LocalView is not used in your system, see
on page
Monitoring
Color
You have the option of specifying if a color video feed is viewed in color or in black and
white (b&w). Removing the checkmark from the Color box on the Video tab shows the
video feed in b&w (see
Figure 5-1
toggled on/off, as needed.
Recording Settings
Use the Recording tab to setup the Continuous video recording settings. The values are
reported in Recording Settings on the Video tab. See
on page 78. See
Recording Settings
Setup, page 93, and
(PTZ)
Rapid Eye DVR System Administrator Guide
Maintenance Session
on page 85. See also the
Guide.
Setting a Bandwidth Throughput Option
to disable LocalView.
147
on 75). Color continues to be recorded and can be
page
Motion Detection
on page 96.
Using a PTZ Camera
and does not
Rapid Eye™ Multi-Media
on page
147
Enabling or Disabling Local
Recording Video with Continuous
on page 125. See
Pan, Tilt, and Zoom
Guide,
to setup
77