Replacing The Blade - Roland TrueVIS VG-640 User Manual

Replacing Consumable Parts

Replacing the Blade

If the blade becomes dull, or if the edge of the blade is chipped, or if the blade quality is lowered, replace it
with a new blade.
CAUTION
CAUTION
Required items
3
Blade for replace
1.
Enter the "REPLACE KNIFE" menu.
A
Remove any media.
B
Press [MENU].
C
Press [ ] several times to display the screen shown below.
MENU
SUB MENU
D
Press [ ] once, and then press [ ] several times to display the screen shown below.
SUB MENU
MAINTENANCE
E
Press [ ] once, and then press [ ] several times to display the screen shown below.
MAINTENANCE
REPLACE KNIFE
F
Press [ENTER].
The cutting carriage moves to a position where blade replacement is possible.
106
Be sure to perform operations as specified by the following instructions,
and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the knife.
Doing so may result in injury.