MASTER CYLINDER DISASSEMBLY
1. Clean master cylinder and reservoir assembly. Make
sure you have a clean work area to disassemble brake
components.
2. Place a shop towel under brake line connection at
master cylinder. Loosen banjo bolt; remove bolt and
sealing washers.
CAUTION:
Brake fluid will damage finished surfaces. Do not allow
brake fluid to come in contact with finished surfaces.
3. Remove master cylinder from handlebars.
Banjo Bolt
- projex@inbox.lv -
BRAKES
Sight Glass
Cover
Diaphragm
Master Cylinder
Piston Assy
9.9