TRANSMISSION
TRANSMISSION ASSEMBLY, CONT.
19. Stretch silent cluster chain tight on a flat surface and
measure the length of 8 pitches in a minimum of
three places on chain.
measurement is longer than 3.0904I.
Chain Stretch Limit
8 pitch length = 3.0904I Maximum
20. Assemble the input shaft and Hi/Low/Reverse gear
cluster as shown.
21. The two shift forks can be easily identified by the
indentations. Low/Neutral shaft has 2 detents, and
Hi/Neutral/Reverse has 3 detents.
22. Install Hi/Reverse cluster in transmission as an
assembly. If necessary use a soft face hammer to
install shafts until fully seated.
8.26
- projex@inbox.lv -
Replace chain if