U-Joint Disassembly - Polaris Sportsman 400 Service Manual

Hide thumbs Also See for Sportsman 400:

Table of Contents

U-JOINT DISASSEMBLY

CAUTION: Always wear eye protection.

1. Remove internal or external snap ring from all

bearing caps.

NOTE:If yoke or bearing is removed, cross bearing

must be replaced. Note orientation of grease fitting and

mark inner and outer yoke for correct re-positioning dur-

ing installation.

2. Support inner yoke as shown and drive outer yoke

down (bearing cap out) with a soft face hammer.

3. Support U-joint in vise as shown and drive inner

yoke down to remove remaining bearing caps.

- projex@inbox.lv -

Show Quick Links

Table of Contents