Polaris Sportsman 400 Service Manual page 208

Hide thumbs Also See for Sportsman 400:

Table of Contents

DRIVE CLUTCH COVER - BUSHING REMOVAL

1. Install main adapter (Item 8) on puller.

2. From outside of clutch cover, insert removal tool

(Item 3) into cover bushing.

3. With inside of cover toward vise, slide cover onto

4. Install nut onto puller rod and hand tighten. Turn

puller barrel to increase tension as needed.

5. Turn clutch cover counterclockwise on puller rod

until bushing is removed.

6. Remove nut from puller rod and set aside.

7. Remove bushing and bushing removal tool from

puller. Discard bushing.

- projex@inbox.lv -

Piston Pin Puller

Main Adaptor

Show Quick Links

Chapters

Table of Contents