Polaris Sportsman 400 Service Manual page 212

CLUTCH
DRIVEN CLUTCH DISASSEMBLY / INSPECTION, CONT.
8. Inspect the Teflon™ coating on the moveable
sheave bushing.
Moveable Sheave Bushing Inspection:
Replace the bushing if more brass than
Teflon™ is visible on the bushing. Re-
fer to bushing replacement in this
chapter.
9. Inspect driven clutch faces for wear or damage.
10. Clean and inspect
transmission input shaft.
11. Lube splines with a light film of grease. Do not
lubricate the bushings!
6.28
- projex@inbox.lv -
splines on helix and
Inspect bushings for wear