DRIVEN CLUTCH MOVEABLE SHEAVE - BUSHING REMOVAL,
CONT.
5. Working from the top, install bushing removal tool
(Item 5) into center of clutch sheave with smaller
diameter toward bushing to be removed.
illustration at right.
6. Install sheave onto puller.
7. Install nut onto puller rod and tighten by hand. Turn
puller barrel for further tension if needed.
8. Turn clutch sheave counterclockwise until bushing
is removed. Repeat steps 5 - 8 for other bushing.
9. Remove nut from puller rod and set aside.
10. Remove adapters from puller.
11. Remove bushing and removal tool from adapters.
Discard bushing.
- projex@inbox.lv -
See
CLUTCH
Bushing
Removal Tool (#5)
6.31