Pstn Gateway Features - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide

PSTN Gateway Features

Figure 28 illustrates the PSTN Gateway features and connections.
1
POWER
UP DOWN
1. Display
2. Reset
3. PSTN Line Ports 1–4
4. Bypass Port
5. RJ-45 Ethernet Network Port 10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
6. DC 5.1V Power-Supply Jack
Getting Started
LINE 1
LINE 1
LINE 2
RESET
LINE 3
LINE 4
2
SELECT CANCEL
Figure 28. PSTN Gateway Features and Connections
Provides system and network status, device information, and
configuration data. See
page 61.
Restarts the Gateway when pressed momentarily.
Restores factory defaults when pressed and held for more than five
seconds with the LAN cable not connected.
Traditional 2-conductor wiring (FXO — Foreign Exchange Office
Ports).
Traditional analog POTS (Plain Old Telephone Service) that is
available during an AC power outage. When the Gateway power
fails, calls on Line 4 are routed to the bypass line.
LINE 2 LINE 3 LINE 4 BYPASS
4
3
"Gateway Front Panel Interface" on
55
Back to Contents
DC 5.1V
LAN
- +
5 6