Gateway Front Panel Interface - AT&T SB67010 PSTN Installation Manual

Synapse Installation Guide

Gateway Front Panel Interface

You can access basic information and perform some configuration tasks using the
Gateway's front panel. You may find that most of these tasks are easier to do using the
WebUI. See
Use the Gateway main menu to perform some system operations. To access the Gateway
main menu from the Idle screen, as shown in Figure 34, press the
From the main menu you can access the:
Device Information screen

Network Status screen

Configuration menu.

Press the
your Gateway or your Network.
Select Configuration to view or modify some Gateway settings. See

Configuration" on page
On the Device Information screen, you can view:




On the Network Status screen, you can view:





Press
Getting Started
"WebUI Overview" on page
 30 )(%
3671 /LQHV   
6\QFKURQL]HG
,3  
Figure 34. Gateway Idle Screen (PSTN Gateway shown)
Figure 35. Gateway Menu Screens
key to highlight an entry, then press
62.
Model #
Serial #
Boot Version
IP Address
Subnet Mask
Default Gateway
DNS Server x
to return to the main menu.
61
76.
to see information about
Software Version

Firmware Version (PSTN Gateway only).

MAC Address

Network Port

Local Address.

Back to Contents
key.
"Gateway