AT&T SB67010 PSTN Installation Manual page 98

Synapse Installation Guide
To resolve an incorrect system clock:
If the system clock displays the wrong time, the system lacks Internet access for
acquiring current time data.
1. Log on to the WebUI as administrator.
2. Under System Settings, click Basic Settings.
3. In the System Time/Date Options section, specify a local Network Time Protocol
(NTP) Server, or manually set the time.
4. Click
To resolve problems with a cordless device:
For features or audio problems, make sure that the Deskset associated with the cordless
device does not share the problem.
1. Verify that the device battery has power.
When removed from the charger, the handset screen is lit for about 30 seconds.

When removed from the charger, the headset emits a dial tone or three beeps

when you press ON/
2. Verify that the Deskset Cordless Settings screen indicates that the device is
registered.
Press MENU –> 2 –> 6.

If the handset is not registered, register it:

a.
b. At the Deskset, press MENU –> 2 –> 6 –> 1 –>
If the headset is not registered, register it:

a.
b. At the Deskset, press MENU –> 2 –> 6 –> 2 –>
c.
Troubleshooting
.
.
OFF
Place the handset in the charger.
Place the headset in the charger.
In Line Appearance mode, press MENU –> 2 –> 3 –> 2 –>
97
Back to Contents
.
Register
.
Register
.
Register