DAEWOO V–121 BL4
BODY FRONT END 9R – 11
12. Remove the bolts along the top of the fender.
13. Remove the fender.
Installation Procedure
1.
Install the headlamp. Refer to Section 9B, Lighting
Systems.
2.
Install the fender.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
3.
Install the bolts along the top of the fender.
Tighten
Tighten the upper fender bolts to 8 NSm (71 lb–in).
4.
Install the bolt at the base of the A–pillar.
Tighten
Tighten the A–pillar fender bolt to 8 NSm (71 lb–in).