Clutch Pedal Adjustment (Hydraulic) Removal - Daewoo Nubira Owner's Manual

DAEWOO V–121 BL4
9. Align the shaft to the fork and install the bolt.
Tighten
Tighten the clutch fork–to–release lever shaft bolt to
35 NSm (26 lb–ft).
10. Coat the spline on the clutch disc with multi–pur-
pose grease.
11. Align the pressure plate and the clutch disc onto
the flywheel using the clutch arbor J–42474.
12. Install the pressure plate bolts.
Tighten
Tighten the pressure plate–to–flywheel bolts to 15
NSm (11 lb–ft).
13. Remove the clutch arbor J–42474.
14. Install the transaxle into the vehicle. Refer to Sec-
tion 5B, Five–Speed Manual Transaxle
15. Install the engine under covers. Refer to Section
9N, Frame and Underbody.
16. Install the left front wheel. Refer to Section 2E,
Tires and Wheels.
17. Lower the vehicle.
18. Connect the negative battery cable.
CLUTCH PEDAL ADJUSTMENT
(HYDRAULIC)
Removal Procedure
1. Determine the clutch pedal play. Press the clutch
pedal lightly with your hand andmeasure the dis-
tance when you feel resistance.
CLUTCH 5C0 – 15