Knock Sensor Removal - Daewoo Nubira Owner's Manual

1F – 402IENGINE CONTROLS
3. Reposition the carpet.
4. Install the lower B–pillar trim panel. Refer to Sec-
tion 9G, Interior Trim.
5. Install the passenger front rocker trim panel. Refer
to Section 9G, Interior Trim.
6. Connect the negative battery cable.
Important : The fuel cutoff switch may have to be reset to
enable the vehicle to start.
KNOCK SENSOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the intake manifold. Refer toSection 1C,
DOHC Engine Mechanical.
3. Disconnect the electrical connector at the Knock
Sensor (KS).
4. Remove the KS.
DAEWOO V–121 BL4